Enter the Bolex

It does look good though

I’ve found a way of making photography even more expensive and difficult. I’ve bought another movie camera. This time it is a Bolex H16. My particular model was made around 1950. It’s clockwork and came with three lenses. Two of which work.

All I need to do is undoo that screw in the middle

The camera uses “double perforation” 16mm film which goes from the top spool to the bottom one. The perforations are there so that the camera mechanism can pull the film down one frame at a time in the film gate. A little pin or “claw” moves up and down grabbing each perforation, holding it still while the camera takes a picture on it and then moving on to the next frame. The original 16mm film had perforations on both sides, but later versions did away with the second perforation to make more room for the image. Single perforation “Super 8” cameras, made from the late 1950’s are more desirable because this film is much more common. Double perforation film seems to be only available in the ‘states.

You can convert a “double perforation” camera into a “single perforation” one by getting rid of the little spikes on one side of the wheels that pull the film into the camera. I might have a go at doing this, but first I want to run a film through the camera to prove that it works properly. I can wind it up and press the trigger and everything moves and makes a very satisfying “movie camera” sound, but I really need a bit more than that. So, now the hunt is on for some suitable film.