Self destructing setting storage

It turns out that creating useful embedded devices seems to be around 80% setting storage and management. I’ve created a nice little setting manager that exposes the settings as C structures, stores them in EEPROM and allows settings to be updated via JSON messages or via direct commands. Settings are bound to the process or sensor that needs them and it works well.

I thought it might be nice to be able to make a complete dump of all the settings so that I can configure a device by sending them all once. This mostly worked. The mostly bit was caused by the way that the settings are stored in EEPROM as they are received. Writing to EEPROM takes quite a long time, certainly longer than setting information takes to arrive down the serial port. So my program loses track of the inputs and misses some setting values.

“No problem” I thought. I’ll create a new setting that tells my device not to persist the setting values as they are received. That way I flip this setting and receive all the values at full speed. Then I save all the settings after they have been updated.

I added the code and got it all going. It mostly worked again. This time it would store more settings but still lose the plot towards the end of the setting file. It took me a little while to work out what was happening.

The block of settings I was restoring contained an instruction to turn the setting persistence back on again. So, half way through downloading the settings the program promptly breaks itself…